How It Works



Stay-Puts:
  • Make sure the black end cap on the end of the hammock rod is centered on the support rod.
  • Using your finger, pull the nylon loop to stretch the stay-put out over the end of the hammock rod until secured.
  • The rubber material on both the end cap and stay-put prevents any sliding from occurring.
         

 


Travel Mode & Hunting Mode:
The Gun Hammock™ rod width is fully adjustable, providing 2 optional set-ups.

 
  • Travel Mode:  The Gun Hammock™ rods are positioned closer together and secured with the stay-puts, allowing for the case to be easily zipped shut and providing additional space for multiple Gun Hammocks™ or gear.

 

  • Hunting Mode:  This set up is used when quick & easy insertion and removal of your gun is essential.  With the Gun Hammock™ completely unzipped, position the rods farther apart on one end of the hammock – making sure that your gun can be inserted/removed easily without obstruction – and securing each rod with the stay-puts.  Only one side of the Gun Hammock™ needs to be adjusted to allow for easy insertion/removal of gun.  It is up to you to decide which method of inserting your gun is most comfortable and adjusting the corresponding side of the hammock to accommodate this.  Concealed Outdoors™ suggests using “hunting mode” for to and from the field excursions, but recommends “travel mode” for extended periods of travel.  Your gun is still completely protected in both modes.
   

 


To Insert or Remove Gun:

  • With the Gun Hammock™ already installed and secured in place with stay-puts, completely unzip the top.  Unhook 1 stay-put to free the end of one of the hammock rods and expand the width of the opening – insert your gun – return the hammock rod to its original position – and secure the stay-put.  The Gun Hammock™ can now be zipped shut.  Repeat these steps in reverse order to remove your gun.

   

 


Additional Accessory Pockets:

  • 2 large accessory pockets are located on one side.
  • These accessory pockets are expandable with Velcro closures and sized to accommodate a variety of gun accessories and other essential gear.

 

To Remove:

  • To remove the Gun Hammock™ and use it as a standard gun case, unhook all 4 stay-puts and lift the Gun Hammock™ vertically out of the chest or cross-over box.  The Gun Hammock™ rods can be removed or left in place to suit your needs.